Tubing and Pipes

Electric Resistance Welded (ERW) Products – Square, Rectangular, Round and Oval Tubes. ERW is a process where electrical contacts or induction coils are used to manufacture the pipe. Steel strip is uncoiled, leveled and crop-sheared. It is then trimmed on both sides at the same time to correct width and immediately fed into the forming and welding line. This strip is fed into a series of cold forming rolls, where it is formed into a tubular shape, and then joined by high frequency electric resistance welding. The resulting product has a uniform wall thickness, and the welded area is heat-treated by post annealing to ensure adequate ductility at the weld.

ERW Hollow Sections Metric Inch
Size 12*12*1,5mm- 200*200*10mm 1″*1′-8’*8′
Length 6m 20′
Standarts ASTM, BS, EURONORM, AFNOR, DIN
ERW Hollow Sections
ERW Pipes Metric Inch
Size 12*12*1,5mm- 200*200*10mm 1″*1′-8’*8′
Length 6m 20′
Standarts ASTM, BS, EURONORM, AFNOR, DIN
ERW Pipes
Water and Gas Pipes Inch
Size 1/2″-6″
Length 20′
Standarts ASTM, BS, EURONORM, AFNOR, DIN
Water and Gas Pipes